Construction General Purpose Sealant for Mirror Sealing and Bonding
One part neutral cure silicone sealant ideal for mirror
HOW TO USE
Clean all joints removing all foreign matter and contaminants such
as oil, grease, dust, water, frost, old sealants, surface dirt, or
glazing compounds and protective coatings.
Apply GB562 in a continuous operation using dispensing guns. Before
a skin forms, tool the sealant with light pressure to spread the
sealant against joint surfaces. Remove masking tape as soon as the
bead is tooled.
GB 562 is a chemical product, not edible, no implantation into body
and should be kept away from children.
Cured silicone rubber can be handled without any risk to health.
Should uncured silicone sealant contact with eyes, rinse thoroughly
with water and seek medical treatment if irritation persists.
Avoid prolonged exposure of skin to uncured silicone sealant.
Good ventilation is necessary for work and cure places.
Complete technical information and literature as well as relevant
testings are available from Guibao.
One part, neutral cure, easy to use.
Non-corrosive to the coated materials on the back of mirror.
Long lasting water resistance.
GB 562 is available in clear,white, black and gray.
GB 562 is available in disposable cartridges (net 300ml) ,24 pieces
to a carton.
GB 562 is designed to meet or even exceed the requirements of:
China corporation specification.
GB 562 mirror silicone sealant is designed for:
Side or back joint seal of mirror.
Sealing the joints between glass and ceramic tiles, concrete walls,
These values are not intended for use in preparing specifications
|GB/T 13477 (ISO 7390)||Slump(vertical)||mm||≤3||0|
|GB/T 13477 (ISO 8394)||Extrusion rate||ml/min.||≥80||500|
|GB/T 13477 (ASTM D 2377)||Tack free time||h||≤3||0.2|
|GB/T 13477 (ASTM C 794)||Peel strength||N/mm||4.0|
*GB: Chinese National Standard.
ASTM: American Society for Testing and Materials.
ISO: International Standardization Organization.
GB562 should not be applied:
As structural glazing sealant.
To the materials that bleed oils , plasticizers or solvents or
To the surfaces requiring painting on sealant.
To underground joints.
To asphalt surfaces.
When surface temperature below 4℃ or over 50℃.